2020 4-port Intel 13-inch MacBook Pro 2.Once I quit AlDente-Pro and reopened it, the Mac started charging as normal and charged past 24%. It was on 24% battery when I plugged it in to the monitor, and after an hour it stayed at 24% and wouldn't charge despite the fact that I set the AlDenete-Pro charging limit to 65%. In the morning, I connected the MacBook Pro to my monitor via USB-C without opening the lid and proceeded to use my Mac in clamshell mode. I closed my MacBook Pro and left it on my bedside table unplugged overnight. A few nights ago, I noticed a similar issue. However, if you want your MacBook to not go to Sleep until the Charge Limit is reached, you can of course activate this feature.I think the issue might be something to do with the Mac going into sleep mode or hibernation mode. This feature is only necessary for MacBook models of categories 1 and 2. No! If you have a MacBook model on the list below, you do not need to enable the feature Disable Sleep Until Charge Limit in order for the Charge Limit to work in Sleep. Do I need to enable the feature Disable Sleep Until Charge Limit in order for the charge limit to work in sleep? However, everything works as expected and it will stop blinking again when Discharge is done. AlDente Pro will help you set charging limits and turn on heat protection when necessary, so you can work with your charger connected and not worry about the health of your MacBook’s battery. This is due to macOS thinking something is wrong with the charger. MagSafe LED blinking Orange/Green during Dischargeĭuring Discharge the MagSafe LED might start blinking Orange and Green. You can read more about the Hardware Battery Percentage here. Therefore, if you have the feature Hardware Battery Percentage activated, the real charge limit will be much more accurate as well. Calibration Mode The battery of a laptop is a vital component, and it has a lot of jobs to perform. If the current temperature is more than the maximum temperature, then AlDente will stop charging to reduce the temperature. This is due to this mechanism always using the Hardware Battery Percentage and not the one macOS is showing you. AlDente will continuously monitor the battery temperature of your Mac. Charge Limit inaccuracies after Sleep or Powered offĭue to the different technical pathways, we are using for these devices to control charging, the real charge limit might deviate by a couple of percent from the charge limit set in AlDente. When you turn on your MacBook again after a while, the battery percentage will be 80%. It will continue charging to the set Charge Limit of 80% and stop automatically when the Charge Limit is reached. The Charge Limit set in AlDente is 80% and the feature Hardware Battery Percentage is also enabled. Your MacBook is plugged in and charging, and the current battery percentage is 60%. When you open your MacBook after a while again, the battery percentage will be 80%. It will continue charging to the set Charge Limit of 80% and stop automatically when the Charge Limit is reached. Planning to use AlDente Pro on my new MBP 14. You close the lid and your MacBook goes to Sleep. Your MacBook is plugged in and charging, and the current battery percentage is 65%. Therefore, your MacBook will stop charging at the set Charge Limit even when it is in Sleep or when you turn it off. The technical pathway of controlling charging on these Intel MacBooks does not require macOS to be running in order for AlDente to be able to stop charging when the charge limit is reached. The behavior of AlDente during Sleep and Powered Off With this new update, all of the features of AlDente Pro are now supported including Charge Limiter, Discharge, Sailing Mode, Heat Protection, Calibration Mode, Hardware Battery Percentage, Fast User Switching Support, and Charge Limiter during Sleep and Powered Off. Starting with AlDente 1.17 we expand support to 16 more MacBook models listed below. Good news for everyone with an old Intel MacBook.
0 Comments
Leave a Reply. |